How to Flash Discoveri Y D-5 MT6572 6.0 New Versone Firmware
How to Flash Discoveri Y D-5 MT6572 6.0 New Versone Firmware
If you are looking for a way to flash your Discoveri Y D-5 smartphone with the latest MT6572 6.0 New Versone firmware, you have come to the right place. In this article, we will show you how to download and install the flash file on your device using a simple and easy method.
Flashing your Discoveri Y D-5 can help you fix various issues such as bootloop, hang on logo, virus infection, software errors, or performance problems. It can also update your device to the latest Android version and improve its features and security. However, flashing can also wipe out all your data and settings, so make sure you backup your important files before proceeding.
Discoveri Y D-5 Flash File MT6572 6.0 New Versone Firmware
Before you start flashing, you will need some tools and files to complete the process. Here is a list of what you will need:
A Windows PC or laptop
A USB cable to connect your device to the PC
A Discoveri Y D-5 smartphone with at least 50% battery charge
The MT6572 USB VCOM drivers for your PC (you can download them from here)
The SP Flash Tool software for your PC (you can download it from here)
The Discoveri Y D-5 MT6572 6.0 New Versone firmware file (you can download it from here)
Once you have downloaded and extracted all the files, you can follow these steps to flash your Discoveri Y D-5:
Install the MT6572 USB VCOM drivers on your PC by following the instructions in the zip file.
Run the SP Flash Tool as administrator on your PC.
Click on the "Download" tab and then click on the "Choose" button next to the "Scatter-loading File" option.
Browse and select the scatter file from the firmware folder. It should be named "MT6572_Android_scatter.txt".
Make sure all the boxes are checked and then click on the "Download" button at the top.
Turn off your Discoveri Y D-5 and remove the battery (if possible).
Connect your device to the PC using the USB cable while holding the volume down or volume up button (depending on your device).
The flashing process will start automatically and you will see a progress bar on the SP Flash Tool.
Wait until you see a green tick mark indicating that the flashing is done.
Disconnect your device from the PC and insert the battery (if removed).
Turn on your device and enjoy the new firmware.
Congratulations! You have successfully flashed your Discoveri Y D-5 with the MT6572 6.0 New Versone firmware. If you encounter any problems or have any questions, feel free to leave a comment below. 0efd9a6b88
https://www.timjrobertson.com/group/my-site-group/discussion/771e3d37-c892-4477-a4c5-4597a14ff43d